427 Cobra
Fuel Lines
Change Order
Chronological Order
Main
Ordering
Receiving
Inventory
Fuel Tank
Brackets
Powder Coating
Engine Build
Frame Dolly
Frame Problems
Fuel Lines
Air Breather
Headers
Aligning The Body
Wheels
Clutch
Brake Lines
Pipes
Radiator
Roll Bars
Rear Axle
Body Mounting
Steering
Dash
Pedals
Engine Stand
Front Suspension
Engine Mount
Transmission Mount
Seats
Emergency Brake
Trunk Hinges
Trunk Latch
Trunk Lid Support
Door Latch
Door Striker
Door Fit
Hood
Hood Support
Rear Bumper
Gas Cap
Roll Bars Thru Body
Convertable Top
Wiring Trunk
Wiring Dash
Wiring
Wipers
Final Assemble

We are using a fuel filter from Jegs.  We welded a 3 inch plate on the 1 inch cross member to mount the filter and pump.  Also later this plate will be used to mount brake lines.  We then mounted the filter and pump using 1/4 inch bolts.  We are making connections using the 3/8 aluminum fuel line.  The vent line is ran to and clamped to the top of the shock tower.

The engine will require 114 GPH at max performance, not that I will be driving it around that way.  We selected a Holley 150 Fuel Pump.  It is a bit pricey, but worth it.  Not only will it deliver the fuel but It is very quiet.

The fuel line is then ran along and clamped to the frame.

The forward end of the line will be connected to a regulator later.

PARTS LIST FOR THIS PAGE

Qty Part Number Description Cost Each
1 555-15170 Jegs Fuel Filter 34.99
1 510-12-150 Holley Electric Fuel Pump 214.99
3 555-100106 Jegs 3/8" NPT to -6AN Flare Fitting 4.69
1 555-100146 Jegs 3/8" NPT to 90  -6AN Flare Fitting 9.99
6 100550 Jegs 3/8 tubing to -6AN Flare Female Fitting 7.99
1 82032 Jegs Cushion Clamps 10/pkg 8.99
1 15100 Jegs 3/8 Fuel Line Aluminum 25ft 19.99
2 100551 Jegs 3/8 tubing to -6AN Flare Male Fitting 8.99
1   #8x3/4 Hex Head Self taping screws 100/pkg